Dave R
Junior Member
Posts: 79
|
Post by Dave R on Dec 13, 2022 12:14:50 GMT -5
I have two DEQX crossover/room correction processors for sale - one HDP-4 and one 2.6P. These are no longer made and getting harder to find. DEQX is still in business. As you may know, these can provide up to a three way crossover function plus room correction.
They are more similar than different. Neither has USB audio in so you'll need a USB interface if you want to use USB audio, or they take AES/EBU or S/PDIF. I used a Singxer SU-1 USB interface, not included. They both also have analog audio in, both balanced and single ended. Both have balanced and single ended audio out for all three frequency bands. The HDP-4 also has digital audio out for each of the three outputs - low, mid, high - allowing you to use external DACs if you prefer.
Each includes a remote control, calibrated microphone, microphone cable, and instructions. I'd be happy to deliver and help get you started with either of these, but note that I'm not an expert. You can hire a DEQXpert to set these up, Tom P. can speak more to this, I've never used the service.
Prices are $2,750 for the HDP-4 and $1,250 for the 2.6P. Feel free to ask questions, email is best if you have my email address.
|
|
|
Post by speakertom on Dec 13, 2022 12:47:25 GMT -5
I have used another DEQX unit, the Express II for many years and it is outstanding. The new models are coming out sometime in the first quarter of 2023 and I am scheduled to be a beta tester of the Pre 8 Advanced HD Active. www.deqx.com/products/ If you are going to use any of the DEQX equipment and expect to get the best results, I would suggest you use one of their DEQXperts. The person I used was Larry Owens. krc-us.com/ The reason I say that is two fold. First, the installer's manual for the unit I have is 143 pages long. Second, Larry has a lot of experience with many different setups and knows when a device suggested correction needs to be modified based on his experience to get the best results. The last time I used him in my new room, he spent 4 1/2 hours to do all the adjustments. He does the setup remotely by linking to the computer you are using connected to the measurement mike. If any of you know Jim Gerfin, he was here for the session and can attest to the results.
|
|